|
Angled Blade Plates
|
|
Condylar Plates 95° For Adults
With DCP dynamic compression holes and slot for tension device. All condylar plates have an angle of 950 between blade and shaft. The two holes next to the blade are suitable for 6.5mm Cancellous bone screws, all other holes are
self-compressing holes. Fixation with 4.5 mm cortical screws. For fractures in the distal and proximal femoral region as well as for intertrochanteric valgus osteotomy.
Profile
Thickness - 5.6mm
Width - 16.0mm
Hole Spacing - 16.0mm
U-profile blade - 6.5x16.0mm
5 Holes Shaft length 92 mm
Cat No. Blade Length
(Measured on the inside)
162-051 50 mm
162-052 60 mm
162-053 70 mm
162-054 80 mm
7 Holes Shaft length 124 mm
Cat No. Blade Length
(Measured on the inside)
162-071 50 mm
162-072 60 mm
162-073 70 mm
162-074 80 mm
9 Holes Shaft length 156 mm
Cat No. Blade Length
(Measured on the inside)
162-091 50 mm
162-092 60 mm
162-093 70 mm
162-094 80 mm
12 Holes Shaft length 204 mm
Cat No. Blade Length
(Measured on the inside)
162-011 50 mm
162-012 60 mm
162-013 70 mm
162-014 80 mm
14 Holes Shaft length 236 mm
Cat No. Blade Length
(Measured on the inside)
162-021 50 mm
162-022 60 mm
162-023 70 mm
162-024 80 mm
16 Holes Shaft length 268 mm
Cat No. Blade Length
(Measured on the inside)
162-031 50 mm
162-032 60 mm
162-033 70 mm
162-034 80 mm
18 Holes Shaft length 300 mm
Cat No. Blade Length
(Measured on the inside)
162-041 50 mm
162-042 60 mm
162-043 70 mm
162-044 80 mm
|
Angled Blade Plates 1300 for Adults
With DCP dynamic compression holes and slot for tension device (from 6 holes up).
These plates have an angle of 1300 between blade and shaft. Fixation with 4.5 mm cortical screws. For femoral neck and pertrochanteric fractures.
Profile
Thickness - 5.6 mm
Width - 16mm
Hole Spacing - 16.0mm
U-profile blade - 6.5x16mm
4 Holes Shaft length 60 mm
Cat No. Blade Length
(Measured on the inside)
163-041 50 mm
163-042 60 mm
163-043 70 mm
163-044 80 mm
6 Holes Shaft length 104 mm
Cat No. Blade Length
(Measured on the inside)
163-061 50 mm
163-062 60 mm
163-063 70 mm
163-064 80 mm
9 Holes Shaft length 152 mm
Cat No. Blade Length
(Measured on the inside)
163-091 50 mm
163-092 60 mm
163-093 70 mm
163-094 80 mm
12 Holes Shaft length 200 mm
Cat No. Blade Length
(Measured on the inside)
163-001 50 mm
163-002 60 mm
163-003 70 mm
163-004 80 mm
|
|
Angled Blade Plate for Intertrochanteric Femoral Osteotomies in Adults 90°
With DCP dynamic compression holes and slot for tension device. Fixation with 4.5 mm cortical screws. The hole in the bend enables fixation of the calcar femors with a long cortical screw.
Profile
Thickness - 5.6mm
Width - 16.0mm
Hole Spacing - 16.0mm
U-Profile Blade - 6.5x16.0mm
Displacement T
Cat No. Holes Blade Length
(Measured on the inside)
170-040 4 40 mm
170-050 4 50 mm
170-060 4 60 mm
170-070 4 70 mm
170-140 5 40 mm
170-150 5 50 mm
170-160 5 60 mm
170-170 5 70 m
|
Angled Blade Plate for Intertrochanteric Femoral Osteotomies in Adults 120°
With DCP dynamic compression holes and slot for tension device.
Fixation with 4.5 mm cortical screws. For repositioning osteotomies in the treatment of femoral neck pseudarthroses and fractures.
Profile
Thickness - 5.6mm
Width - 16.0mm
Hole Spacing - 16.0mm
U-profile blade - 6.5x16.0mm
Cat No. Holes Blade Length
(Measured on the inside)
171-060 4 60 mm
171-065 4 65 mm
171-070 4 70 mm
171-075 4 75 mm
171-080 4 80 mm
171-085 4 85 mm
171-160 5 60 mm
171-165 5 65 mm
171-170 5 70 mm
171-175 5 75 mm
171-180 5 80 mm
171-185 5 85 mm
|
|
DHS / DCS Implants
|
|
DHS Plate
With DCP dynamic compression holes and slots for tension device
Fixation with 4.5mm cortial screws.
For pertochanteric and intertrochanteric fractures.
Profile
Thickness-5.8mm
Width-19.0mm
Hole Spacing-16.0mm
OuterBarrelDiameter-12.6mm
Barrel Length-38mm
ShortBarrel Length -25MM
|
|
DCS Plates 95°
With DCP dynamic compression holes and slot for tension device.
Fixation with 4.5 mm cortical screws. For condylar fractures, avoids further damage to
the bone.
Profile
Thickness - 5.4mm
Width - 16.0mm
Hole Spacing - 16.0mm
Barrel Length - 25 mm
Cat No. Holes Length
167-006 6 100 mm
167-007 7 115 mm
167-008 8 130 mm
167-009 9 146 mm
167-010 10 163 mm
167-012 12 198 mm
167-014 14 225 mm
167-016 16 260 mm
167-018 18 306 mm
167-020 20 338 mm
167-022 22 370 mm
|
DHS/DCS Screw
Profile
Thread Diameter - 12.5mm
Thread Length - 22.0mm
Shaft Diameter - 8.0mm
Cat No. Length
168-050 50 mm
168-055 55 mm
168-060 60 mm
168-065 65 mm
168-070 70 mm
168-075 75 mm
168-080 80 mm
168-085 85 mm
168-090 90 mm
168-095 95 mm
168-100 100 mm
168-105 105 mm
168-110 110 mm
168-115 115 mm
168-120 120 mm
168-125 125 mm
168-130 130 mm
168-135 135 mm
168-140 140 mm
168-145 145 mm
|
|
Compression Screw
For use with DHS and DCS plates.
Hexagonal Socket - 3.5mm
Cat No. Length
168-990 36 mm
|
DHS Barrel Double Angled Plate 120°
With DCP dynamic compression holes and slot for tension device.
Fixation with 4.5 mm Cortical Screws.
Profile
Thickness - 5.4mm
Width - 16.0mm
Hole Spacing - 16.0mm
Barrel Length - 25mm
Cat No. Holes
166.104 4
166.105 5
166.106 6
166.107 7
166.108 8
|
