|
Plates for 4.5 mm & 6.5 mm Screws
|
|
Straight Reconstruction plate - 4.5 mm
Profile
Thickness - 2.8mm
Width - 12.0mm
Holes Spacing - 16.0mm
Cat No. Holes Length
149.105 5 77 mm
149.106 6 93 mm
149.107 7 109 mm
149.108 8 125 mm
149.109 9 141 mm
149.110 10 157 mm
149.112 12 189 mm
149.114 14 221 mm
149.116 16 253 mm
149.118 18 285 mm
149.120 20 317 mm
149.122 22 349 mm
|
LC-DCP - 4.5 mm, Narrow
Fixation with 4.5 and 6.5 mm screws.
The LC-DCP holes allow compression in both directions of the longitudinal axis.
The end holes can be used for cancellous bone screws.
Undercuts : For reduced vascular damage.
Indication: As a neutralisation and tension band plate on the tibia (not intended for the femur).
LC-DCP = Limited Contact Dynamic Compression Plate.
Profile
Thickness - 4.6mm
Width - 13.5mm
Hole Spacing - 18.0mm
Cat No. Holes Cat No. Holes
150-104 4 150-110 10
150-105 5 150-111 11
150-106 6 150-112 12
150-107 7 150-114 14
150-108 8 150-116 16
150-109 9
|
|
LC-DCP - 4.5 mm, Broad
Fixation with 4.5 and 6.5 mm screws.
The LC-DCP holes allow compression in both directions of the longitudinal axis.
The end holes can be used for cancellous bone screws.
Undercuts : For reduced vascular damage.
Indication: As a tension band plate on the Femur and for Humeral pseudarthrosis
(not intended for the Tibia).
LC-DCP = Limited Contact Dynamic Compression Plate.
Profile
Thickness - 6.0mm
Width - 17.5mm
Hole Spacing - 18.0mm
Cat No. Holes Cat No. Holes
151-104 4 151-112 12
151-105 5 151-113 13
151-106 6 151-114 14
151-107 7 151-115 15
151-108 8 151-116 16
151-109 9 151-117 17
151-110 10 151-118 18
151-111 11
|
Spoon Plate
Shaft with V-profile for the fixation on the frontal edge of the tibia.
Fixation with 4.5 mm cortical screws.
Profile
Thickness - 3.0mm
Head Width - 33.0mm
Cat No. Holes Length
155-105 5 100 mm
155-106 6 120 mm
|
|
Lengthening Plate 4.5mm, Narrow - 8 Holes
Profile
Thickness - 3.6mm
Width - 12.0mm
Hole Spacing -12.0mm
Cat No. Lengthening Length
152.130 30 mm 135 mm
152.140 40 mm 145 mm
152.150 50 mm 155 mm
152.160 60 mm 165 mm
152.170 70 mm 175 mm
152.180 80 mm 185 mm
|
Semi-Tubular Plate 4.5 mm
Fixation with 4.5 mm cortical screws.
A compression effect can be achieved by eccentric positioning of the screws remote from the fracture line.
Profile
Thickness - 1.0mm
Width - 11.0mm
Hole Spacing - 16.0 and 26.0mm
Cat No. Holes Cat No. Holes
156-104 4 156-109 9
156-105 5 156-110 10
156-106 6 156-111 11
156-107 7 156-112 12
156-108 8
|
|
Lengthening Plate 4.5 mm, Broad
Profile
Thickness - 4.5mm
Width - 16.0mm
Hole Spacing - 12.0mm
8 Holes
Cat No. Lengthening Length
153.130 30 mm 135 mm
153.140 40 mm 145 mm
153.150 50 mm 155 mm
153.160 60 mm 165 mm
10 Holes
Cat No. Lengthening Length
154.150 50 mm 179 mm
154.160 60 mm 189 mm
154.170 70 mm 199 mm
154.180 80 mm 209 mm
154.190 90 mm 219 mm
154.200 100 mm 229 mm
154.210 110 mm 239 mm
154.220 120 mm 249 mm
|
DCP 4.5, Narrow
Fixation with 4.5 and 6.5 mm screws.
All holes are designed as self-compressing holes. All the end holes are designed for cancellous
bone screws.
Indication: As a neutralisation and tension band plate on the tibia (not intended for the femur).
Profile
Thickness - 3.6 mm
Width - 12.0 mm
Hole Spacing - 16.0 and 25.0mm
Cat No. Holes Cat No. Holes
157-104 4 157-111 11
157-105 5 157-112 12
157-106 6 157-113 13
157-107 7 157-114 14
157-108 8 157-115 15
157-109 9 157-116 16
157-110 10
|
|
DCP 4.5 mm, Broad
Fixation with 4.5 and 6.5 mm screws.
All holes are designed as self-compressing holes.
All the end holes are designed for cancellous
bone screws.
Indication: As a tension band plate on the
femur and for humeral pseudoarthrosis
(not intended for the tibia).
Use broad plates with six or seven holes in exceptional cases only, e.g. on the humerus.
Profile
Thickness - 4.5mm
Width - 16.0mm
Hole Spacing - 16.0 and 25.0mm
Cat No. Holes Cat No. Holes
158-104 4 158-111 11
158-105 5 158-112 12
158-106 6 158-114 14
158-107 7 158-116 16
158-108 8 158-118 18
158-109 9 158-120 20
158-110 10
|
T-Plate 4.5 mm
Shaft with round profile, for humeral and tibial head. Fixation with 4.5 & 6.5 mm screws.
Profile
Thickness - 2.0mm
Width - 17.0mm
Cat No. Holes Length
159-103 3 68 mm
159-104 4 84 mm
159-105 5 100 mm
159-106 6 116 mm
159-107 7 132 mm
159-108 8 148 mm
159-109 9 164 mm
159-110 10 180 mm
|
|
T-Buttress Plate 4.5 mm
With double bend, as buttress for tibial head fractures. Fixation with 4.5 & 6.5 mm screws.
Profile
Thickness - 2.0mm
Width - 17.0mm
Cat No. Holes Length
160-104 4 81 mm
160-105 5 96 mm
160-106 6 112 mm
160-107 7 128 mm
160-108 8 144 mm
160-109 9 160 mm
160-110 10 176 mm
|
L-Buttress Plate 4.5 mm
With double bend, as buttress for tibial and humeral head fractures. Left angled for right leg & right angled for left leg.
Profile
Thickness - 2.0mm
Width - 16.0mm
For Left Leg For Right Leg
Cat No. Holes Cat No.
161-133 3 161-103
161-134 4 161-104
161-135 5 161-105
161-136 6 161-106
161-137 7 161-107
161-138 8 161-108
161-139 9 161-109
161-140 10 161-110
|
|
Condylar buttress plate 4.5 mm
With DCP dynamic compression holes and slot for tension device. As buttress for the femoral
condyles with multiple fragment fractures.
Shaft Profile
Thickness - 5.0mm
Width - 16.0mm
Hole Spacing - 16.0mm
For Left Leg For Right Leg
Cat No. Holes Cat No.
164-007L 7 164-107R
164-009L 9 164-109R
164-011L 11 164-111R
164-012L 12 164-112R
164-013L 13 164-113R
164-015L 15 164-115R
|
Lateral Tibial Head Buttress Plate - 4.5 mm
Fixation with 4.5 & 6.5mm screws shaft with
DCP dynamic compression holes and slot for tension device. Left angled for right leg and right angled for left leg..
Shaft Profile
Thickness - 3.8mm
Width - 14.0mm
Hole Spacing - 16.0mm
For Left Leg For Right Leg
Cat No. Holes Cat No.
165-105L 5 165-005R
165-107L 7 165-007R
165-109L 9 165-009R
165-111L 11 165-011R
165-113L 13 165-013R
|
|
Cobra Head Plate - 4.5 mm
Shaft with DCP dynamic compression holes and slot for tension device. For arthrodesis of the hip.
In the two shaft holes next to the head, two 4.5 mm cortical screws, length 68 mm, are normally used.
Shaft Profile
Thickness - 6.0mm
Width - 16.0mm
Hole Spacing - 16.0mm
Cat No. Holes
193.008 8
193.009 9
193.010 10
193.011 11
|
Hook Plate - 4.5 mm
Fixation with 4.5 mm Cortical Screws.
Shaft with DCP dynamic compression holes
and slot for tension device.
Profile
Thickness - 6.0mm
width - 16.0mm
Cat No. Holes Length
194.000 6 128 mm
|
