|
Small Fragment Implants
|
|
3.5 mm Cortical Screw
Profile
Thread Diameter - 3.5mm
Drill Bit for Threaded Hole - 2.5mm
Drill Bit for Gliding Hole - 3.5mm
Core Diameter - 2.4mm
Hexagonal Socket - 2.5mm
Head Diameter - 6.0mm
Cat No. Length Cat No. Length
102.010 10mm 102.032 32mm
102.012 12mm 102.034 34mm
102.014 14mm 102.036 36mm
102.016 16mm 102.038 38mm
102.018 18mm 102.040 40mm
102.020 20mm 102.042 42mm
102.022 22mm 102.044 44mm
102.024 24mm 102.046 46mm
102.026 26mm 102.048 48mm
102.028 28mm 102.050 50mm
102.030 30mm
|
3.5 mm Cancellous Screw
Profile
Thread Diameter - 3.5mm
Drill Bit for Threaded Hole - 2.5mm
Drill Bit for Gliding Hole - 2.5mm
Core Diameter - 1.9mm
Hexagonal Socket - 2.5mm
Head Diameter - 6.0mm
Cat No. Length Cat No. Length
103.010 10mm 103.028 28mm
103.012 12mm 103.030 30mm
103.014 14mm 103.035 35mm
103.016 16mm 103.040 40mm
103.018 18mm 103.045 45mm
103.020 20mm 103.050 50mm
103.022 22mm 103.055 55mm
103.024 24mm 103.060 60mm
103.026 26mm
|
|
4.0 mm Cancellous Bone Screw -
Short Thread
Profile
Thread Diameter - 4.0mm
Drill Bit for Threaded Hole - 2.5mm
Shaft Diameter - 2.4mm
Core Diameter - 1.9mm
Hexagonal Socket - 2.5mm
Head Diameter - 6.0mm
Cat No. Length Cat No. Length
104.010 10mm 104.028 28mm
104.012 12mm 104.030 30mm
104.014 14mm 104.035 35mm
104.016 16mm 104.040 40mm
104.018 18mm 104.045 45mm
104.020 20mm 104.050 50mm
104.022 22mm 104.055 55mm
104.024 24mm 104.060 60mm
104.026 26mm
|
4.0 mm Cancellous Bone Screw -
Fully Threaded
Not to be used as lag screws.
Profile
Thread Diameter - 4.0mm
Drill Bit for Threaded Hole - 2.5mm
Core Diameter - 1.9mm
Hexagonal Socket - 2.5mm
Head Diameter - 6.0mm
Cat No. Length Cat No. Length
105.010 10mm 105.028 28mm
105.012 12mm 105.030 30mm
105.014 14mm 105.035 35mm
105.016 16mm 105.040 40mm
105.018 18mm 105.045 45mm
105.020 20mm 105.050 50mm
105.022 22mm 105.055 55mm
105.024 24mm 105.060 60mm
105.026 26mm
|
|
3.5 mm Shaft Screw
Profile
Thread Diameter - 3.5mm
Drill Bit for Threaded Hole - 2.5mm
Drill Bit for Gliding Hole - 3.5mm
Core Diameter - 2.4mm
Hexagonal Socket - 2.5mm
Head Diameter - 6.0mm
Shaft Diameter - 3.5mm
Cat No. Length Cat No. Length
113.012 12mm 113.032 32mm
113.014 14mm 113.034 34mm
113.016 16mm 113.036 36mm
113.018 18mm 113.038 38mm
113.020 20mm 113.040 40mm
113.022 22mm 113.045 45mm
113.024 24mm 113.050 50mm
113.026 26mm 113.055 55mm
113.028 28mm 113.060 60mm
113.030 30m
|
4.0 mm Small Cannulated
Screw - Short Threaded
Profile
Thread Diameter - 4.0mm
Shaft Diameter - 2.5mm
Core Diameter - 2.5mm
Hexagonal Socket - 2.5mm
Head Diameter - 6.0mm
Cannulation - 1.35mm
Cat No. Length Cat No. Length
116.010 10mm 116.034 34mm
116.012 12mm 116.036 36mm
116.014 14mm 116.038 38mm
116.016 16mm 116.040 40mm
116.018 18mm 116.042 42mm
116.020 20mm 116.044 44mm
116.022 22mm 116.046 46mm
116.024 24mm 116.048 48mm
116.026 26mm 116.050 50mm
116.028 28mm 116.055 55mm
116.030 30mm 116.060 60mm
116.032 32mm
|
|
4.0 mm Small Cannulated
Screw - Fully Threaded
Profile
Thread Diameter - 4.0mm
Core Diameter - 2.5mm
Hexagonal Socket - 2.5mm
Head Diameter - 6.0mm
Cannulation - 1.35mm
Cat No. Length Cat No. Length
116.210 10mm 116.234 34mm
116.212 12mm 116.236 36mm
116.214 14mm 116.238 38mm
116.216 16mm 116.240 40mm
116.218 18mm 116.242 42mm
116.220 20mm 116.244 44mm
116.222 22mm 116.246 46mm
116.224 24mm 116.248 48mm
116.226 26mm 116.250 50mm
116.228 28mm 116.255 55mm
116.230 30mm 116.260 60mm
116.232 32mm
|
Washer for 4.0mm
Cancellous screws
Cat No.
115.010 |
|
One-third Tubular Plate
Used as buttress plate for fibula, metatarsals and metarcarpals. Fixation with 3.5 & 4.0 mm screws. Compression effect can be achieved by eccentric insertion of remote screws.
Profile
Thickness - 1.0mm
Width - 9.0mm
Hole Spacing - 12.0 and 16.0mm
(One-third tube 12 mm dia.)
Cat No. Holes Cat No. Holes
138.102 2 138.107 7
138.103 3 138.108 8
138.104 4 138.109 9
138.105 5 138.110 10
138.106 6 138.112 12
|
One-third Tubular Plate with Collar
Used as buttress plate for fibula, metatarsals and metarcarpals. Fixation with 3.5 & 4.0 mm screws. Compression effect can be achieved by eccentric insertion of remote screws.
Profile
Thickness - 1.0mm
Width - 9.0mm
Hole Spacing - 12.0 and 16.0mm
(One-third tube 12 mm dia.)
Cat No. Length Cat No. Length
139.122 2 139.127 7
139.123 3 139.128 8
139.124 4 139.129 9
139.125 5 139.130 10
139.126 6 139.132 12
|
|
DCP 3.5mm
For Ulna and Radius
Profile
Thickness - 3.5mm
Width - 10.0mm
Hole Spacing - 12.0 and 16.0mm
Cat No. Holes Cat No. Holes
140.102 2 140.107 7
140.103 3 140.108 8
140.104 4 140.109 9
140.105 5 140.110 10
140.106 6 140.112 12
|
Straight Reconstruction Plate - 3.5mm
Note: Do not Bend More than 15°
Profile
Thickness - 2.8mm
Width - 10.0mm
Hole Spacing - 12.0mm
Cat No. Holes Cat No. Holes
144-105 5 144-112 12
144-106 6 144-114 14
144-107 7 144-116 16
144-108 8 144-118 18
144-109 9 144-120 20
144-110 10 144-122 22
|
|
Small T-Plate, Right Angled
For the Left and Right Radius. Fixation with 3.5 & 4.0mm screws. Head with three holes.
Profile
Thickness - 1.2mm
Width - 10.0mm
Holes in Holes in
Cat No. Shaft Cat No. Shaft
141.103 3 141.105 5
141.104 4 141.106 6
|
Small T-Plate, Oblique Angle
For the Left and Right Radius. Fixation with 3.5 & 4.0mm screws. Head with three holes.
Profile
Thickness - 1.5mm
Width - 10.0mm
Holes in Holes in
Cat No. Shaft Cat No. Shaft
142-103 3 142-105 5
142-104 4 142-106 6
|
|
Y-Reconstruction Plate
Cat No. Size Holes
145.102 Small 6
145.103 Medium 9
145.104 Large 12 |
Cloverleaf Plate
For distal Intra-Articular tibial Fractures. Fixation with 3.5 & 4.0 mm screws.
Profile
Thickness - 2.0mm
Width - 15.2mm
Cloverleaf Thickness - 1.2mm
Cat No. Holes Cat No. Holes
146-103 3 146-108 8
146-104 4 146-109 9
146-105 5 146-110 10
146-106 6 146-111 11
146-107 7 146-112 12
|
|
Calcaneal Plate - 3.5 mm
For Calcaneus Fractures
Fixation with 3.5 and 4.0 mm screws
Profile
Thickness - 1.2mm
Cat No. Length
137.160 60 mm
137.170 70 mm
|
Semi Tubular Plate - 3.5 mm
Profile
Thickness - 1.0mm
Width - 11.0mm
Hole Spacing - 16.0 & 26.0mm
Cat No. Holes
143.102 2
143.103 3
143.104 4
143.105 5
143.106 6
143.107 7
143.108 8
143.109 9
143.110 10
143.111 11
143.112 12
|
|
LC-DCP-3.5mm
For Ulna & Radius.
Fixation with 3.5 & 4.0 mm screws.
Profile
Thickness - 4.0mm
Width - 11.0mm
Hole Spacing - 13.0mm
Cat No. Holes Cat No. Holes
147.104 4 147.109 9
147.105 5 147.110 10
147.106 6 147.111 11
147.107 7 147.112 12
147.108 8
|
Hook Plate - 3.5 mm
Cat No. Holes
148.104 4
148.105 5
148.106 6
148.107 7
148.108 8
148.110 10
|
